BMW Heater Valve Repair Kit with Cone - 64118375443

The sealing components and replacement valve cones in this kit service the mechanical section of the heater control valves on the BMW applications below. Match the installed valve number to the corresponding application group.

Vehicle Applications and Valve References

Match the Heater Valve Version

The installed valve P/N is the main selection criterion. Different heater valve versions may be fitted to the listed BMW models; compare the reference and physical design before ordering.

When to Inspect the Heater Valves

• The heater blows only hot air.
• The heater blows only cold air.
• Cabin temperature cannot be adjusted.
• Left and right air temperatures differ.
• Cabin heating is weak in winter.
• Coolant leaks through the heater valve.

Inspect the valves and heating system to identify the cause. These symptoms alone do not establish that the sealing components are faulty.

Repair Components

This is the version with a replacement valve cone and sealing components. Replace hardened or torn rubber elements and retain unused repair parts.

Valve and Related References

Use the valve references in the application table for selection. All valve and related references are preserved in the Part Number / PN section.

Repair Scope

If the housing and solenoids are sound, the mechanical and sealing components can be serviced without replacing the complete heater valve assembly. Seal replacement can address a coolant leak caused by worn seals. A cracked housing may require replacement of the complete unit.

Important Before Ordering

Compare the installed heater valve OEM/P/N, marking and design with the listed references. Select the correct kit version and do not rely on chassis code alone.

FAQ

Is VN-461 the version with a cone?

Yes. This version includes a replacement valve cone and sealing components.

Which reference is listed for BMW X5 E70?

BMW X5 E70 is listed for 02/2006 - 03/2010 with valve reference 64116928495.

What should be inspected when the heat does not match the setting?

Inspect the heater valve block and check the rubber elements for hardening or tears.

Must the complete heater valve block be replaced?

Not always. The mechanical components can be serviced when the housing and solenoids remain sound.

Part Number / PN

64118375443, 64114383988, 64118369620, 64118391418, 64111387391, 64118379921, 64116920226, 64118369805, 64118369807, 64116928495, 650066998447, 64118369551, 8369551, 64 11 1 387 846, 1 387 846

SKU: VN-461.

Inspection and Replacement

If airflow is uneven or the temperature does not match the setting, disassemble the heater valve block and inspect the rubber components. Replace hardened or torn rubber elements, and retain unused repair parts.

Heater valve repair kits

• BMW

Returns and exchanges

Request a change-of-mind return within 14 calendar days of delivery, then send the goods within 14 calendar days of notifying us. Our voluntary return option applies to unused, uninstalled, complete goods in their original condition and packaging. Exchanges are subject to availability and agreement.

The customer pays change-of-mind return shipping. No restocking fee applies. Refunds and original delivery charges are handled under our Refund & Return Policy and applicable law.

Faulty, damaged or incorrect goods

Email contact-us@klifex.net with your order details and a description of the problem. These claims are separate from change-of-mind returns. Where we are responsible, we bear the required remedy and return costs. Installation alone does not remove mandatory defect rights.

Your legal rights

Applicable statutory rights take precedence, including EU/EEA and UK withdrawal rights and legal guarantees. Necessary inspection does not remove a statutory withdrawal right; deductions for excessive handling must reflect an actual, evidenced loss of value.

Contact us for the correct return address before shipping. Our legal address is not a return address.

Read the full Refund & Return Policy