Front Mud Flap Bracket Set — Audi Q7 4L | 4L0 075 111 A
Product Overview
A set of metal brackets is designed for mounting the front mudguards of the Audi Q7 4L. These are separate left and right brackets that allow you to install or restore the mudguards without having to buy the entire original kit 4L0 075 111 A. The metal thickness is 1.5 mm - the same as standard brackets. The original number 4L0 075 111 A refers to the mudguard kit. This product contains mounting brackets and is suitable in cases where the mudguards themselves are present, but the standard metal brackets are missing, damaged or deformed. When you should pay attention to the mudguard brackets: the left or right standard bracket is lost; the bracket is bent or has mechanical damage; the mudguard cannot be properly secured at standard points; the mudguards themselves have been preserved, but the mounting brackets are missing; There is no need to buy a full original set of mudguards just because the brackets are damaged. Equipment: left front mudguard bracket; right front mudguard bracket. Number of the original set of mud flaps for selection: 4L0 075 111 A Applicable to: Audi Q7 4L Technical characteristics: material - metal; metal thickness - 1.5 mm; location - front mudguards; installation side - left and right; condition - new; Includes 2 brackets. Advantages: no need to buy the entire original set of mudguards 4L0 075 111 A if you only need brackets; The kit includes left and right brackets; the metal thickness is 1.5 mm, like standard brackets; allow you to restore the original mounting of the front mudguards of the Audi Q7 4L. Important! This product is not a complete set of mud flaps for Audi 4L0 075 111 A. The kit includes only two metal brackets - left and right. Before ordering, compare the shape, hole location and mounting points with the parts installed on the vehicle and photographs of the product. FAQ What exactly is included in the kit? The kit includes two metal brackets for the front mudguards of the Audi Q7 4L: left and right. Are the mudguards themselves included in the kit? No. The kit includes only mounting brackets. Mudguards are not included. 4L0 075 111 A - is this the number of the brackets? No. 4L0 075 111 A is the number of the original mudguard kit for which these brackets are intended. For what Should I buy the brackets separately? If the mudguards themselves are in good condition, but the brackets are damaged or missing, you can replace only the brackets and not buy a complete original set. What is the thickness of the metal? The metal thickness is 1.5 mm. Are both sides included? Yes. The kit includes left and right brackets. What car is the kit intended for? The brackets are designed for Audi Q7 generation 4L. How to check compatibility? Check the original set of mudguards 4L0 075 111 A and compare the shape, holes and mounting points of the brackets with the product photos. Part Number/PN: 4L0 075 111 A
Purpose and Fitment
This item is intended for the specified vehicle assembly identified by SKU KL4l0075111A and OEM/P/N 4l0075111A. Vehicle model alone is not a sufficient fitment check.
Part Number / PN
4l0075111A, KL4l0075111A
Package Contents
Includes the product or repair components shown in the listing images and identified by SKU KL4l0075111A. The surrounding assembly is not included unless it is explicitly shown and described.
Benefits and Limitations
- Supports repair or replacement of the identified component when diagnosis confirms the fault.
- Does not correct faults in wiring, connectors, control modules or adjacent mechanical parts.
Pre-Order Check
Compare the exact OEM/P/N, dimensions, connectors, orientation and physical design with the installed part. Use 4l0075111A as the primary reference and confirm the installation procedure for the specific vehicle.
FAQ
How do I confirm fitment?
Match the OEM/P/N and physical design to the installed part before ordering.
When should this part be inspected?
Inspect it after diagnosis points to the identified assembly; similar symptoms can be caused by adjacent components.
Is professional installation recommended?
Use the service procedure and tools specified for the vehicle. Professional installation is recommended when special tools, calibration or disassembly are required.
Read All
Orders ship within 1–2 business days.
Standard delivery:
- USA: Some items ship from our US warehouse and arrive within 3 business days.
- USA-EU: 10–21 business days
- Worldwide: 14–30 business days
Shipping cost is shown at checkout.
Can I exchange or return an item?
Yes, you can exchange or return an item within 14 days of purchase. This right is guaranteed to you by the Law on the Protection of Consumer Rights
To use this feature, please make sure that:
- the product was not in use and has no traces of use: scratches, chips, abrasions, etc.
- the goods are fully completed and the integrity of the packaging is not violated
- retained all labels and factory markings