Electric handbrake motor BMW 7 F01, F02 34436856931

Handbrakes on BMW 7 F01 and BMW 7 F02 cars can break, which usually occurs both due to natural causes of wear and tear, and against the background of mechanical damage. If such a problem happened, then the letter P can be seen on the instrument panel, while the car cannot either be put on the handbrake or removed from it. If the car is locked, then it can be urgently removed from the handbrake using a special red key from the tool kit that the car is equipped with.

However, such actions will not fix the problem that has completely appeared, because the handbrake will still work incorrectly. This is due to the appearance of violations in the functioning of the parking brake. To understand how to fix such a malfunction, you should understand its device. The handbrake of the BMW 7 F01 and F02 has a motor 34436856931, which tensions and releases the brake pad cables. And one of the most common reasons for the failure of the handbrake is a breakdown of the electric motor.

This happens due to various reasons, and in particular because of the following:

• jamming of bearings;
• brush abrasion;
• ingress of liquid into the block.

To solve the current problem, you can replace the entire parking brake control unit, but this is quite expensive, because the new system costs from 20 thousand hryvnias and more. If the whole point is a malfunction of the electric motor, then the problem can be solved by replacing it alone, and then the handbrake will function correctly again. If you are sure that the electric motor burned out, then using our website you can change it for a new one.

How to remove the handbrake if it is blocked?

1. It is necessary to use the key that came with the car among the tools.
   
2. The emergency handbrake release cable is located on the left side of the trunk next to the lamp.
3. You need to put a wrench on the cable and pull until a click occurs.

Replaced:

• 34434098596 (20.08.2015 - 30.08.2016), you can get tired.at the deputy .on an older auth.
• 34436877316 (01.03.2016 — ), you can get tired.at the deputy .on an older auth.
• 34436864132 (01.07.2013 - 06.08.2015), it is impossible to get tired.at the deputy .on an older auth.
• 34436868044 (01.07.2014 - 17.09.2015), you can get tired.at the deputy .on an older auth.
• 34436869478 (01.04.2015 - 19.04.2017), you can get tired.at the deputy .on an older auth.
• 34436877315 (01.03.2016 - 04.05.2017), you can get tired.at the deputy .on an older auth.
• 34436881647 (01.03.2016 — ), you can get tired.at the deputy .on an older auth.
• 34436882005 (01.07.2016 — ), it is impossible to get tired.at the deputy .on an older auth.

Replaces:

• 34436797789 (01.10.2010 - 13.06.2013), double-sided replaceable
• 34436797175 (01.04.2010 - 26.05.2011), double-sided replaceable
• 34436796892 (30.11.2009 - 23.04.2010), you can get tired.at the deputy .on an older auth.
• 34436784652 (30.11.2009 - 29.08.2012), double-sided replaceable
• 34436784651 (01.03.2009 - 07.09.2012), double-sided replaceable
• 34436790417 (01.09.2008 - 04.03.2009), you can get tired.at the deputy .on an older auth.
• 34436789533 (01.09.2008 — 17.06.2008)

The spare part was found on the following cars:

    7' F01 (06/2007 — 06/2012)
    7' F01 LCI (05/2011 — 05/2015)
    7' F02 (07/2007 — 06/2012)
    7' F02 LCI (05/2011 — 05/2015)
    7' F03 (04/2008 — 05/2012)
    7' F03 LCI (01/2012 — 03/2015)
    7' F04 Hybrid (10/2008 — 06/2012)
    Ghost RR4 (08/2008 — 09/2017)

• BMW

Orders ship within 1–2 business days.

Standard delivery:

• USA: Some items ship from our US warehouse and arrive within 3 business days.
• USA-EU: 10–21 business days
• Worldwide: 14–30 business days

Shipping cost is shown at checkout.

Can I exchange or return an item?

Yes, you can exchange or return an item within 14 days of purchase. This right is guaranteed to you by the Law on the Protection of Consumer Rights

To use this feature, please make sure that:

• the product was not in use and has no traces of use: scratches, chips, abrasions, etc.
• the goods are fully completed and the integrity of the packaging is not violated
• retained all labels and factory markings