Air suspension compressor temperature sensor Land Rover Discovery 3 4 Range Rover Sport LR015303 LR023964
Product Overview
The temperature sensor is installed on the AMK air suspension compressor and monitors its temperature during operation. The sensor signal is used by the air suspension system to control the heating of the compressor. A malfunction of the sensor or its wiring can lead to air suspension errors, incorrect temperature detection, premature shutdown of the compressor, or failure to start the compressor. The part is intended for AMK air suspension compressors, which are installed on Land Rover Discovery 3 / LR3, Land Rover Discovery 4 / LR4 and Range Rover Sport. The sensor is supplied with wiring and electrical connectors for connection to the compressor. When to check the compressor temperature sensor: the air suspension compressor does not start or periodically turns off; air suspension system errors appear; the system incorrectly detects the compressor temperature; the compressor turns off earlier than it should; the wiring, connector or sensor itself is damaged; During diagnostics, a malfunction of the compressor temperature sensor was detected. Numbers for selection: LR015303 LR023964 LR044360 LR045251 LR061663 LR072537 LR010376 LR011837 LR012800 LR032902 LR038114 LR038115 LR038116 LR038117 LR038118 LR038148 LR006200 RQG500080 RQG500130 RQG500150 RQG500160 Applicable to: Land Rover Discovery 3 LR3 - 2005-2009, AMK compressor Land Rover Discovery 4 LR4 - 2010-2014, AMK compressor Range Rover Sport - 2006-2013, AMK compressor Equipment: air suspension compressor temperature sensor; wiring with connectors. Advantages: allows you to replace a faulty temperature sensor separately from the compressor; designed for AMK air suspension compressors of the corresponding design; allows you to restore compressor temperature control without replacing the entire unit; Comes with wiring and connectors for connection. Important! Before ordering, check the type of air suspension compressor installed and its part number. The numbers shown may refer to the compressor or air suspension components with which this sensor is used. The part is intended for AMK compressors of the corresponding design. FAQ What is this part? This is an AMK air suspension compressor temperature sensor with wiring and connectors. What is a temperature sensor used for? It monitors the temperature of the compressor during operation and transmits information to the air suspension system. What are the symptoms of a faulty sensor? Errors air suspension, incorrect compressor shutdown, failure to start, or incorrect temperature readings. Does the compressor assembly need to be replaced? No. If the compressor is working properly, and the malfunction is related specifically to the temperature sensor or its wiring, the sensor can be replaced separately. What vehicles is the sensor intended for? For Land Rover Discovery 3 LR3, Discovery 4 LR4 and Range Rover Sport with suitably designed AMK air suspension compressor. Part Number / PN: LR015303, LR023964, LR044360, LR045251, LR061663, LR072537, LR010376, LR011837, LR012800, LR032902, LR038114, LR038115, LR038116, LR038117, LR038118, LR038148, LR006200, RQG500080, RQG500130, RQG500150, RQG500160
Purpose and Fitment
This item is intended for the air-suspension system identified by SKU KLLR0452512 and OEM/P/N LR0452512. Vehicle model alone is not a sufficient fitment check.
Part Number / PN
LR0452512, KLLR0452512
Package Contents
Includes the product or repair components shown in the listing images and identified by SKU KLLR0452512. The surrounding assembly is not included unless it is explicitly shown and described.
Benefits and Limitations
- Supports repair or replacement of the identified component when diagnosis confirms the fault.
- Does not correct faults in wiring, connectors, control modules or adjacent mechanical parts.
Pre-Order Check
Compare the exact OEM/P/N, dimensions, connectors, orientation and physical design with the installed part. Use LR0452512 as the primary reference and confirm the installation procedure for the specific vehicle.
FAQ
How do I confirm fitment?
Match the OEM/P/N and physical design to the installed part before ordering.
When should this part be inspected?
Inspect it after diagnosis points to the identified assembly; similar symptoms can be caused by adjacent components.
Is professional installation recommended?
Use the service procedure and tools specified for the vehicle. Professional installation is recommended when special tools, calibration or disassembly are required.
Read All
Orders ship within 1–2 business days.
Standard delivery:
- USA: Some items ship from our US warehouse and arrive within 3 business days.
- USA-EU: 10–21 business days
- Worldwide: 14–30 business days
Shipping cost is shown at checkout.
Can I exchange or return an item?
Yes, you can exchange or return an item within 14 days of purchase. This right is guaranteed to you by the Law on the Protection of Consumer Rights
To use this feature, please make sure that:
- the product was not in use and has no traces of use: scratches, chips, abrasions, etc.
- the goods are fully completed and the integrity of the packaging is not violated
- retained all labels and factory markings