{"product_id":"right-intake-manifold-audi-a4-a5-a6-a7-a8-q5-q7-volkswagen-touareg-3-0-tfsi-06e133110af-kl06e133110af","title":"Right intake manifold Audi A4, A5, A6, A7, A8, Q5, Q7, Volkswagen Touareg 3.0 TFSI 06E133110AF","description":"\u003ch1\u003eRight intake manifold Audi A4, A5, A6, A7, A8, Q5, Q7, Volkswagen Touareg 3.0 TFSI 06E133110AF\u003c\/h1\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe right-hand intake manifold 06E133110AF is installed on the right side of the V6 3.0 TFSI \/ 3.0 TSI engine and distributes air between the intake ports of the corresponding cylinder bank. Inside the manifold there is a damper mechanism that changes the air flow depending on the engine speed and load. Failure of the dampers, actuator, position sensor or housing leaks can lead to a Check Engine, intake system errors, reduced power, failures during acceleration and unstable engine operation. This is a separate right-hand section of the intake manifold. For the left bank of cylinders, a mirror manifold with number 06E133109AF is used. When to check the right intake manifold: the Check Engine light comes on on the instrument panel; diagnostics shows an error in the position or operation of the right intake manifold flaps; DTCs P2006, P2014 or P2015 appeared; the engine loses power at low or medium speeds; dips or jerks are felt during acceleration; the intake flaps are jammed or do not reach the specified position; the rod, axle or damper mechanism is worn out; the collector body has a crack or is leaking unaccounted air; actual situation damper does not correspond to the specified value. Right intake manifold numbers: 06E133110AF 06E133110AB 06E133110AC 06E133110AL 06E133110AP 06E133110AR 06E133110AS 06E133110BE Engines: 3.0 TFSI V6 3.0 TSI V6 Applicable to: Audi A4 — 2008–2015 Audi A4 Avant — 2008–2015 Audi S4 — 2008–2015 Audi S4 Avant quattro — 2008–2015 Audi A5 Cabriolet — 2010–2017 Audi S5 Cabriolet — 2010–2017 Audi A5 Coupe — 2008–2016 Audi A5 Sportback — 2008–2016 Audi S5 Coupe — 2008–2016 Audi S5 Sportback — 2008–2016 Audi A6 — 2009–2014 Audi A6 Avant — 2009–2014 Audi A6 Allroad quattro — 2007–2018 Audi S6 — 2009–2014 Audi S6 Avant quattro — 2009–2014 Audi A7 Sportback — 2011–2014 Audi A8 — 2010–2013 Audi S8 quattro — 2010–2013 Audi Q5 — 2013–2017 Audi Q5 Sportback — 2013–2017 Audi Q7 — 2010-2015 Volkswagen Touareg - 2011-2018 Important: 06E133110AF - right intake manifold. The left manifold has the number 06E133109AF. The details are mirrored and are not interchangeable between the parties. The designation “right” is determined by the direction in which the vehicle is moving. Before ordering, you must check the number of the installed manifold, the mounting side, the engine code, the design of the connectors and the damper drive. Over the years, revisions 06E133110AB, 06E133110AC, 06E133110AF, 06E133110AL, 06E133110AP, 06E133110AR, 06E133110AS and 06E133110BE were used. Compatibility of a specific revision must be checked by the installed part number. FAQ Which side is the 06E133110AF manifold installed on? The 06E133110AF manifold is installed on the right side of the V6 engine and serves the corresponding cylinder bank. What number is the left intake manifold? The mirror manifold for the left side of the engine has the number 06E133109AF and other revisions of the 06E133109 series. Is it possible to install 06E133109AF instead of 06E133110AF? No. These are manifolds for different sides of the engine. They differ in the shape of the body, the arrangement of channels, fasteners and damper controls. What is the function of the flaps inside the manifold? The flaps change the direction and speed of air flow in the intake channels depending on the operating mode of the engine. This affects cylinder filling, traction and engine stability. What errors can be associated with the right manifold? Depending on the nature of the malfunction, intake flap position or control errors may appear, including P2006, P2014 and P2015. The exact cause must be determined by diagnosing the drive, sensor, vacuum system and damper mechanism. Do I need to replace both intake manifolds at the same time? No. If the fault is found only in the right manifold, and the left assembly is normal, only the right side can be replaced. How to check compatibility? Compare the installed right manifold part number to 06E133110AF or one of its compatible part numbers, and check the engine, year and assembly design. Part number \/ PN: 06E133110AF, 06E 133 110 AF, 06E133110AB, 06E 133 110 AB, 06E133110AC, 06E 133 110 AC, 06E133110AL, 06E 133 110 AL, 06E133110AP, 06E 133 110 AP, 06E133110AR, 06E 133 110 AR, 06E133110AS, 06E 133 110 AS, 06E133110BE, 06E 133…\u003c\/p\u003e\u003ch2\u003ePurpose and Fitment\u003c\/h2\u003e\u003cp\u003eThis item is intended for the engine intake system identified by SKU KL06E133110AF and OEM\/P\/N 06E133110AF. Vehicle model alone is not a sufficient fitment check.\u003c\/p\u003e\u003ch2\u003ePart Number \/ PN\u003c\/h2\u003e\u003cp\u003e06E133110AF, 06E133109AF, 06E133110AB, 06E133110AC, 06E133110AL, 06E133110AP, 06E133110AR, 06E133110AS, 06E133110BE, KL06E133110AF\u003c\/p\u003e\u003ch2\u003ePackage Contents\u003c\/h2\u003e\u003cp\u003eIncludes the product or repair components shown in the listing images and identified by SKU KL06E133110AF. The surrounding assembly is not included unless it is explicitly shown and described.\u003c\/p\u003e\u003ch2\u003eBenefits and Limitations\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSupports repair or replacement of the identified component when diagnosis confirms the fault.\u003c\/li\u003e\n\u003cli\u003eDoes not correct faults in wiring, connectors, control modules or adjacent mechanical parts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePre-Order Check\u003c\/h2\u003e\u003cp\u003eCompare the exact OEM\/P\/N, dimensions, connectors, orientation and physical design with the installed part. Use 06E133110AF as the primary reference and confirm the installation procedure for the specific vehicle.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eHow do I confirm fitment?\u003c\/h3\u003e\u003cp\u003eMatch the OEM\/P\/N and physical design to the installed part before ordering.\u003c\/p\u003e\u003ch3\u003eWhen should this part be inspected?\u003c\/h3\u003e\u003cp\u003eInspect it after diagnosis points to the identified assembly; similar symptoms can be caused by adjacent components.\u003c\/p\u003e\u003ch3\u003eIs professional installation recommended?\u003c\/h3\u003e\u003cp\u003eUse the service procedure and tools specified for the vehicle. Professional installation is recommended when special tools, calibration or disassembly are required.\u003c\/p\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":54087209812282,"sku":"KL06E133110AF","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/7605829719_pravyj-vpusknoj-kollektor.jpg?v=1789744493","url":"https:\/\/klifex.net\/products\/right-intake-manifold-audi-a4-a5-a6-a7-a8-q5-q7-volkswagen-touareg-3-0-tfsi-06e133110af-kl06e133110af","provider":"Klifex – Automotive Repair Kits","version":"1.0","type":"link"}