{"title":"Porsche PCV System Repair Kits","description":"\u003ch2\u003e\u003cspan style=\"font-weight: 400;\"\u003ePorsche Crankcase Ventilation (PCV) Systems and Components\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003ePorsches are built to perform and go fast, and their crankcase venting quietly helps keep them that way. The\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ePorsche PCV\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003esystem quietly sends combustion gases back into the intake to burn off, instead of letting oil-laden vapor make a mess. And the matter is more than you might think.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-weight: 400;\"\u003ePCV System Role in Porsche Performance Engines\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eHigh RPMs, flat layouts and turbo boost increase blow-by and oil mist production.\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ePCV Porsche\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003esystems must vent efficiently at idle and shut smoothly on boost. That balance prevents oil from reaching the intake and keeps the turbo seal, sensors, and engine happy.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-weight: 400;\"\u003ePorsche-Specific PCV Engineering Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFactory and quality aftermarket systems aren’t just a single valve. They’re a small orchestra of membranes, separators, and check valves tuned to the boxer’s breathing pattern. Good\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ePorsche crankcase ventilation\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003ehandles pressure swings, separates oil, and behaves predictably whether you are cruising or flogging the car on a back road. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-weight: 400;\"\u003eEarly Warning Signs Porsche Owners Often Miss\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSmall things can snowball into bigger\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ePorsche PCV valve\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003eheadaches for turbos and sensors. Be sure to check for these symptoms:\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSlight oil usage increase during high-load driving.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eOil residue in intake piping.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eIdle instability after aggressive driving.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSubtle changes in throttle response.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOverall, the early hints are very easy to spot: more oil consumption, oily residue in intake piping\/intercooler, a faint whistle, or a jittery idle after hard runs. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-weight: 400;\"\u003eWhen Porsche PCV Valve or Separator Replacement Is Required\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIf you spot something strange or early signs from the list above, it’s time to inspect the separator and\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ePorsche PCV valve\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e. Intervals vary by engine and use, but a hands-on check every 30-100 km is a sensible run for peace of mind.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-weight: 400;\"\u003eKlifex PCV Solutions for Porsche\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eKlifex offers direct‑fit PCV components for Porsche owners. Flow and shutoff characteristics match OE specs, allowing targeted, serviceable\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003ePorsche PCV\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003e \u003c\/span\u003evalve replacements and repairs. In the end, you will get handy, inexpensive ways to restore proper breathing without fuss and oil drops.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"membrane-pcv-porsche-cayenne-3-2l-m02-2y-95511076500","title":"Oil Separator PCV Membrane – Porsche Cayenne 3.2L M02.2Y | OEM 95511076500","description":"\u003ch1\u003eOil Separator PCV Membrane — Porsche Cayenne 3.2L M02.2Y | OEM 95511076500\u003c\/h1\u003e\n\u003ch3\u003e\u003cstrong\u003eStop Oil Consumption and PCV Faults on Your Porsche Cayenne 3.2L — Direct Replacement Membrane.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eA failed oil separator membrane on the Porsche Cayenne 3.2L M02.2Y engine causes oil mist in the intake, increased oil consumption, blue smoke, and crankcase pressure fault codes. This direct replacement membrane restores correct oil separation and crankcase pressure regulation.\u003c\/p\u003e\n\u003ch2\u003eVehicle Compatibility\u003c\/h2\u003e\u003cp\u003ePorsche Cayenne 3.2L M02.2Y petrol\u003c\/p\u003e\n\u003ch2\u003eOEM Reference\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003e95511076500\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":51698719064378,"sku":"KL95511076500","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/2750150223-membrana-kvkg-porsche.jpg?v=1754553079"},{"product_id":"membrane-pcv-porsche-cayenne-4-5-94810513107","title":"PCV Membrane – Porsche Cayenne 4.5L | OEM 94810513107","description":"\u003ch1\u003ePCV Membrane — Porsche Cayenne 4.5L | OEM 94810513107\u003c\/h1\u003e\n\u003ch3\u003e\u003cstrong\u003eStop Oil Consumption and PCV Faults on Your Porsche Cayenne 4.5L — Direct Replacement Membrane.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eA failed PCV membrane on the Porsche Cayenne 4.5L causes oil mist in the intake, increased oil consumption, blue smoke, and crankcase pressure fault codes. Direct replacement membrane — restores correct crankcase pressure regulation.\u003c\/p\u003e\n\u003ch2\u003eVehicle Compatibility\u003c\/h2\u003e\u003cp\u003ePorsche Cayenne 4.5L V8 (955\/957)\u003c\/p\u003e\n\u003ch2\u003eOEM Reference\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003e94810513107\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":51698727682362,"sku":"KL94810513107","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/2750173785-membrana-kvkg-porsche.jpg?v=1754553308"},{"product_id":"diaphragm-pcv-valve-cover-porsche-cayenne-3-6-m55-01-95510513501","title":"PCV Valve Cover Diaphragm – Porsche Cayenne 3.6L M55.01 | OEM 95510513501","description":"\u003ch1\u003ePCV Valve Cover Diaphragm — Porsche Cayenne 3.6L M55.01 | OEM 95510513501\u003c\/h1\u003e\n\u003ch3\u003e\u003cstrong\u003eStop Oil Consumption and PCV Faults on Your Porsche Cayenne 3.6L — Direct Replacement Diaphragm.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eA failed valve cover PCV diaphragm on the Porsche Cayenne 3.6L M55.01 causes oil mist in the intake, increased oil consumption, blue smoke, and crankcase pressure fault codes. Direct replacement for valve covers using OEM 95510513501, 95510513500, and 95810513530.\u003c\/p\u003e\n\u003ch2\u003eVehicle Compatibility\u003c\/h2\u003e\u003cp\u003ePorsche Cayenne 3.6L M55.01 petrol (955\/957)\u003c\/p\u003e\n\u003ch2\u003eOEM References\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e95510513501\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e95510513500 \/ 95810513530 (cross-reference)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":51698743050554,"sku":"KL95510513501","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/3067834419-membrana-kvkg-klapannoj.jpg?v=1754553823"},{"product_id":"oil-separator-membrane-vw-and-audi-3-0tdi-057103495n","title":"Oil Separator Membrane – VW Touareg \/ Audi Q7 3.0 TDI | OEM 057103495N","description":"\u003ch2\u003e057103495N Oil Separator Membrane for VW Touareg Audi Q7 3.0 TDI\u003c\/h2\u003e\u003cp\u003eThe 057103495N oil separator membrane is a replacement crankcase ventilation diaphragm for Volkswagen Touareg and Audi Q7 3.0 TDI applications. This 63 mm membrane is designed to restore the function of the existing oil separator unit without replacing the complete assembly.\u003c\/p\u003e\u003cp\u003eThis product is a membrane \/ diaphragm only. It is intended to repair the existing oil separator and should not be treated as a repair kit or a complete oil separator assembly.\u003c\/p\u003e\u003ch2\u003eOEM \/ Reference Numbers\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePrimary OEM:\u003c\/strong\u003e 057103495N\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated \/ Reference Numbers:\u003c\/strong\u003e No additional reference numbers are explicitly confirmed for this product.\u003c\/p\u003e\u003ch3\u003ePart Type\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOil separator membrane\u003c\/li\u003e\n\u003cli\u003eCrankcase ventilation diaphragm\u003c\/li\u003e\n\u003cli\u003ePCV membrane\u003c\/li\u003e\n\u003cli\u003e3.0 TDI oil separator diaphragm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat This Part Does\u003c\/h2\u003e\u003cp\u003eThis membrane works inside the crankcase ventilation and oil separator system. When the original diaphragm becomes brittle, torn or loses sealing ability, the system may no longer regulate pressure correctly. Replacing the membrane helps restore the function of the existing oil separator unit in a targeted and cost-effective way.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVolkswagen Touareg 2011–2018\u003c\/li\u003e\n\u003cli\u003eAudi Q7 2016–2018\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease verify OEM number, vehicle model, production year and oil separator design before ordering.\u003c\/p\u003e\u003ch3\u003eEngine \/ Engine Family \/ Technical Detail\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEngine focus: 3.0 TDI\u003c\/li\u003e\n\u003cli\u003eMembrane diameter: 63 mm\u003c\/li\u003e\n\u003cli\u003ePart format: membrane \/ diaphragm only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Symptoms of Failure\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCrankcase ventilation pressure imbalance\u003c\/li\u003e\n\u003cli\u003eOil leak symptoms related to a failed diaphragm\u003c\/li\u003e\n\u003cli\u003eWhistling noise from the oil separator area\u003c\/li\u003e\n\u003cli\u003eNeed to repair the existing oil separator unit instead of replacing the complete assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Choose This Replacement\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTargets exact OEM search intent for 057103495N\u003c\/li\u003e\n\u003cli\u003eSupports repair of the existing oil separator unit\u003c\/li\u003e\n\u003cli\u003eCost-effective alternative to replacing the complete assembly\u003c\/li\u003e\n\u003cli\u003eDesigned for the correct 63 mm membrane repair type\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant Before Ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify OEM 057103495N against your original part\u003c\/li\u003e\n\u003cli\u003eConfirm your 3.0 TDI application and oil separator design\u003c\/li\u003e\n\u003cli\u003eCheck the 63 mm membrane size before ordering\u003c\/li\u003e\n\u003cli\u003eMake sure you need the membrane only, not a repair kit or complete oil separator assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat does 057103495N fit?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003e057103495N is listed for Volkswagen Touareg 2011–2018 and Audi Q7 2016–2018 with 3.0 TDI applications.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat does this oil separator membrane do?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eIt helps the crankcase ventilation system regulate pressure inside the existing oil separator unit. A damaged membrane can reduce sealing quality and affect normal PCV operation.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat symptoms can indicate diaphragm failure?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eTypical signs can include crankcase ventilation pressure imbalance, oil leak symptoms, whistling noise from the oil separator area, or the need to repair the existing unit instead of replacing the complete assembly.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eIs this a complete oil separator assembly or membrane only?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThis product is a membrane \/ diaphragm only. It is intended to repair the existing oil separator unit rather than replace the complete assembly.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat technical detail is listed for this membrane?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThe membrane diameter is 63 mm.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow do I confirm compatibility before ordering?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eMatch OEM 057103495N with your original part, verify your vehicle model and year, and confirm the oil separator design and 63 mm membrane size before ordering.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":51698745082170,"sku":"KL057103495N","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/3215799921-membrana-maslootdelitelya-vw.jpg?v=1754553905"},{"product_id":"oil-separator-membrane-porsche-cayenne-4-8l-m48-01-m48-51","title":"PCV Valve Diaphragm – Porsche Cayenne 4.8L M48.01 | OEM 94810723602","description":"\u003ch1\u003ePCV Valve Diaphragm — Porsche Cayenne 4.8L M48.01 | OEM 94810723602\u003c\/h1\u003e\n\u003ch3\u003e\u003cstrong\u003eStop Oil Consumption and Vacuum Leaks on Your Porsche Cayenne 4.8L — Direct Replacement PCV Diaphragm.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eA failed PCV valve diaphragm on the Porsche Cayenne 4.8L M48.01 causes oil mist in the intake, vacuum leaks, rough idle, and crankcase pressure fault codes. This direct replacement diaphragm restores correct crankcase ventilation — ships from US warehouse.\u003c\/p\u003e\n\u003ch2\u003eVehicle Compatibility\u003c\/h2\u003e\u003cp\u003ePorsche Cayenne 4.8L M48.01 petrol (955\/957)\u003c\/p\u003e\n\u003ch2\u003eOEM Reference\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003e94810723602\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":51698765168954,"sku":"KL94810723602","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/2828762271-membrana-maslootdelitelya-porsche.jpg?v=1754554556"},{"product_id":"porsche-oil-separator-membrane-with-3-6-v6-4-8-v8-engines-94810713522","title":"PCV Oil Separator Membrane – Porsche 3.6L V6 \/ 4.8L V8 | OEM 94810713522","description":"\u003ch2\u003e94810713522 PCV Oil Separator Membrane 87mm for Porsche 3.6L V6 \/ 4.8L V8\u003c\/h2\u003e\n\n\u003cp\u003eThis replacement \u003cstrong\u003e87mm PCV oil separator membrane\u003c\/strong\u003e is designed for Porsche Cayenne and Panamera applications with 3.6L V6 or 4.8L V8 engines using compatible oil separators referenced as \u003cstrong\u003e94810713522\u003c\/strong\u003e, \u003cstrong\u003e94810713520\u003c\/strong\u003e or \u003cstrong\u003e94810713521\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThis product is an \u003cstrong\u003eindividual replacement diaphragm for the PCV oil separator system\u003c\/strong\u003e. It is not a complete oil separator assembly.\u003c\/p\u003e\n\n\u003ch2\u003eOEM \/ Reference Numbers\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e94810713522\u003c\/strong\u003e — primary target oil separator reference\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e94810713520\u003c\/strong\u003e — related compatible oil separator reference\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e94810713521\u003c\/strong\u003e — related compatible oil separator reference\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePart Type\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePCV oil separator membrane\u003c\/li\u003e\n  \u003cli\u003eCrankcase ventilation diaphragm\u003c\/li\u003e\n  \u003cli\u003e87mm replacement membrane\u003c\/li\u003e\n  \u003cli\u003eIndividual replacement component\u003c\/li\u003e\n  \u003cli\u003eNot a complete oil separator assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat This Part Does\u003c\/h2\u003e\n\u003cp\u003eThe PCV oil separator membrane helps regulate crankcase pressure and supports proper engine ventilation. Over time, the original membrane can lose elasticity due to heat and oil exposure, leading to cracks or tears that may cause vacuum leaks, unstable engine operation and increased oil consumption.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePorsche Cayenne — 2011 to 2014 — 3.6L V6 \/ 4.8L V8 applications\u003c\/li\u003e\n  \u003cli\u003ePorsche Panamera — 2010 to 2014 — 3.6L V6 \/ 4.8L V8 applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine \/ Technical Details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEngine displacement: 3.6L or 4.8L\u003c\/li\u003e\n  \u003cli\u003eEngine configuration: V6 or V8\u003c\/li\u003e\n  \u003cli\u003eMembrane diameter: 87mm\u003c\/li\u003e\n  \u003cli\u003eMaterial: high-grade oil-resistant elastomer\u003c\/li\u003e\n  \u003cli\u003eDesigned for resistance to heat and engine contaminants\u003c\/li\u003e\n  \u003cli\u003eCompatible oil separator references: 94810713520, 94810713521 and 94810713522\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommon Symptoms of PCV Membrane Failure\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRough or unstable idle\u003c\/li\u003e\n  \u003cli\u003eHigh-pitched whistling noise from the engine bay\u003c\/li\u003e\n  \u003cli\u003eIncreased oil consumption\u003c\/li\u003e\n  \u003cli\u003eSmoke from the exhaust\u003c\/li\u003e\n  \u003cli\u003eVacuum leaks\u003c\/li\u003e\n  \u003cli\u003ePoor engine performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Choose This Replacement Membrane\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAllows replacement of the individual failed PCV membrane without replacing the complete oil separator assembly\u003c\/li\u003e\n  \u003cli\u003eDesigned for compatible Porsche oil separators referenced as 94810713520, 94810713521 and 94810713522\u003c\/li\u003e\n  \u003cli\u003e87mm replacement diaphragm made from oil-resistant elastomer\u003c\/li\u003e\n  \u003cli\u003eTargets vacuum leaks, unstable idle and increased oil consumption associated with a damaged PCV membrane\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eImportant Before Ordering\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify that your oil separator corresponds to reference 94810713520, 94810713521 or 94810713522.\u003c\/li\u003e\n  \u003cli\u003eConfirm your Porsche model, model year and engine configuration against the compatibility information listed above.\u003c\/li\u003e\n  \u003cli\u003eVerify that the required membrane diameter is 87mm.\u003c\/li\u003e\n  \u003cli\u003eThis product is an individual PCV oil separator membrane and not a complete oil separator assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv itemscope itemtype=\"\" https:=\"\"\u003e\n\n  \u003cdiv itemscope itemprop=\"\" mainentity itemtype=\"\" https:\u003e\n    \u003ch3 itemprop=\"\" name\u003eWhat does oil separator reference 94810713522 fit?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"\" acceptedanswer itemtype=\"\" https:\u003e\n      \u003cdiv itemprop=\"\" text\u003e\n        \u003cp\u003eAccording to the product listing, this 87mm replacement PCV membrane is intended for Porsche Cayenne 2011–2014 and Porsche Panamera 2010–2014 applications with 3.6L V6 or 4.8L V8 engines using a compatible oil separator.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"\" mainentity itemtype=\"\" https:\u003e\n    \u003ch3 itemprop=\"\" name\u003eAre 94810713520 and 94810713521 related to 94810713522?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"\" acceptedanswer itemtype=\"\" https:\u003e\n      \u003cdiv itemprop=\"\" text\u003e\n        \u003cp\u003eYes. The product page lists 94810713520, 94810713521 and 94810713522 as compatible oil separator part numbers for this replacement PCV membrane.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"\" mainentity itemtype=\"\" https:\u003e\n    \u003ch3 itemprop=\"\" name\u003eWhat is the diameter of this Porsche PCV oil separator membrane?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"\" acceptedanswer itemtype=\"\" https:\u003e\n      \u003cdiv itemprop=\"\" text\u003e\n        \u003cp\u003eThe replacement PCV membrane has a specified diameter of 87mm.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"\" mainentity itemtype=\"\" https:\u003e\n    \u003ch3 itemprop=\"\" name\u003eWhat symptoms can indicate PCV oil separator membrane failure?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"\" acceptedanswer itemtype=\"\" https:\u003e\n      \u003cdiv itemprop=\"\" text\u003e\n        \u003cp\u003eThe product listing identifies rough or unstable idle, high-pitched whistling from the engine bay, increased oil consumption, exhaust smoke, vacuum leaks and poor engine performance as possible symptoms of membrane failure.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"\" mainentity itemtype=\"\" https:\u003e\n    \u003ch3 itemprop=\"\" name\u003eIs this a complete Porsche oil separator assembly?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"\" acceptedanswer itemtype=\"\" https:\u003e\n      \u003cdiv itemprop=\"\" text\u003e\n        \u003cp\u003eNo. This product is an individual 87mm PCV oil separator membrane and is not a complete oil separator assembly.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv itemscope itemprop=\"\" mainentity itemtype=\"\" https:\u003e\n    \u003ch3 itemprop=\"\" name\u003eHow do I confirm compatibility before ordering?\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"\" acceptedanswer itemtype=\"\" https:\u003e\n      \u003cdiv itemprop=\"\" text\u003e\n        \u003cp\u003eVerify that your oil separator matches reference 94810713520, 94810713521 or 94810713522, confirm that your vehicle is a listed Porsche Cayenne or Panamera application with a 3.6L V6 or 4.8L V8 engine, and check that the required membrane diameter is 87mm.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":51698786861370,"sku":"KL94810713522","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/2765529015-membrana-maslootdelitelya-porsche.jpg?v=1754554950"},{"product_id":"membrane-pcv-porsche-3-0l-и-3-6l-94610723077-and-94610722977","title":"PCV Membrane 52mm – Porsche 3.0L \/ 3.6L Cayenne Panamera | OEM 94610723077 94610722977","description":"\u003ch1\u003ePCV Membrane 52mm — Porsche Cayenne \/ Panamera 3.0L \/ 3.6L | OEM 94610723077 \/ 94610722977\u003c\/h1\u003e\n\u003ch3\u003e\u003cstrong\u003eStop Oil Consumption on Your Porsche Cayenne or Panamera 3.0L\/3.6L — 52mm Direct Replacement Membrane.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eA failed 52mm PCV membrane on the Porsche Cayenne and Panamera 3.0L and 3.6L petrol engines causes oil mist in the intake, increased oil consumption, and crankcase fault codes. Direct replacement for oil separator assemblies using OEM 94610723077 and 94610722977.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 52mm\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVehicle Compatibility\u003c\/h2\u003e\u003cp\u003ePorsche Cayenne 3.0L\/3.6L (955\/957\/958), Porsche Panamera 3.0L\/3.6L (2011–2014)\u003c\/p\u003e\n\u003ch2\u003eOEM References\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e94610723077\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e94610722977 (cross-reference)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":51698863964474,"sku":"KL94610723077","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/3104036225-membrana-kvkg-porsche.jpg?v=1754556576"},{"product_id":"porsche-cayenne-and-vw-touareg-vr6-flute-membrane-3-2l-95511075900-022133759a","title":"Intake Resonance Flute Membrane – Porsche Cayenne \/ VW Touareg VR6 3.2L | OEM 95511075900 022133759A","description":"\u003ch2\u003e95511075900 \/ 022133759A VR6 Flute Membrane for Porsche Cayenne VW Touareg 3.2L\u003c\/h2\u003e\u003cp\u003eThe 95511075900 \/ 022133759A VR6 flute membrane is a 68 mm replacement intake manifold actuator diaphragm for Porsche Cayenne and Volkswagen Touareg 3.2L VR6 applications. It is designed to repair the existing intake manifold flap \/ flute actuator mechanism without replacing the complete intake manifold assembly.\u003c\/p\u003e\u003cp\u003eThis product is an intake manifold actuator membrane only. It should not be treated as a PCV membrane, valve cover diaphragm, oil separator membrane or complete intake manifold assembly.\u003c\/p\u003e\u003ch2\u003eOEM \/ Reference Numbers\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePrimary OEM:\u003c\/strong\u003e 95511075900, 022133759A\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated \/ Reference Numbers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e021133653\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePart Type\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVR6 flute membrane\u003c\/li\u003e\n\u003cli\u003eIntake manifold actuator diaphragm\u003c\/li\u003e\n\u003cli\u003eIntake flap diaphragm\u003c\/li\u003e\n\u003cli\u003eRunner control actuator membrane\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat This Part Does\u003c\/h2\u003e\u003cp\u003eThis membrane works inside the actuator that controls the intake manifold flute \/ flap mechanism. When the original diaphragm fails, the actuator may stop moving correctly, which can affect intake runner operation and engine response.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePorsche Cayenne 3.2L VR6\u003c\/li\u003e\n\u003cli\u003eVolkswagen Touareg 3.2L VR6\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease verify OEM number, vehicle model, engine type and intake manifold actuator design before ordering.\u003c\/p\u003e\u003ch3\u003eEngine \/ Engine Family \/ Technical Detail\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEngine focus: 3.2L VR6\u003c\/li\u003e\n\u003cli\u003eDiaphragm diameter: 68 mm\u003c\/li\u003e\n\u003cli\u003eRelated reference: 021133653\u003c\/li\u003e\n\u003cli\u003ePart format: intake manifold actuator membrane only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Symptoms of Failure\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntake manifold flap actuator not moving correctly\u003c\/li\u003e\n\u003cli\u003eReduced intake runner control function\u003c\/li\u003e\n\u003cli\u003ePoor engine response\u003c\/li\u003e\n\u003cli\u003eVacuum leak symptoms at the actuator\u003c\/li\u003e\n\u003cli\u003eIntake manifold control-related fault symptoms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Choose This Replacement\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTargets exact OEM intent for 95511075900 and 022133759A\u003c\/li\u003e\n\u003cli\u003eSupports repair of the existing intake manifold actuator\u003c\/li\u003e\n\u003cli\u003eCost-effective alternative to replacing the complete intake manifold\u003c\/li\u003e\n\u003cli\u003eDesigned for the correct 68 mm VR6 membrane repair type\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant Before Ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify OEM 95511075900 or 022133759A against your original part\u003c\/li\u003e\n\u003cli\u003eCheck related reference 021133653 where applicable\u003c\/li\u003e\n\u003cli\u003eConfirm your 3.2L VR6 application and actuator design\u003c\/li\u003e\n\u003cli\u003eMake sure you need an intake manifold actuator membrane, not a PCV or oil separator part\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat does 95511075900 \/ 022133759A fit?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThese numbers are used for Porsche Cayenne and Volkswagen Touareg 3.2L VR6 intake manifold flute \/ actuator membrane applications with the matching design.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eIs 021133653 the same type of part as 022133759A?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003e021133653 is a related reference used with the same intake manifold actuator membrane application group.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat does this VR6 flute membrane do?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eIt operates inside the intake manifold actuator that controls the flute \/ flap mechanism.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat symptoms can indicate membrane failure?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eFailure can cause incorrect actuator movement, reduced runner control function, poor engine response or vacuum leak symptoms at the actuator.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eIs this a PCV membrane or intake manifold actuator membrane?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThis product is an intake manifold actuator membrane. It is not a PCV membrane, valve cover diaphragm or oil separator part.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow do I confirm compatibility before ordering?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eMatch OEM 95511075900 or 022133759A with your original actuator and confirm the 3.2L VR6 application, related reference and 68 mm membrane size.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":51698881855802,"sku":"KL95511075900","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/3190593618-membrana-flejty-porsche.jpg?v=1754556763"},{"product_id":"oil-separator-membrane-porsche-cayenne-4-8l-m48-51-94810723653-94810723652","title":"PCV Oil Separator Membrane – Porsche Cayenne 4.8L M48.51 | OEM 94810723653 94810723652","description":"\u003cp\u003eFix Porsche Cayenne 4.8L PCV Issues Without Replacing the Oil Separator!\u003c\/p\u003e\n\u003cp\u003eRestore proper engine vacuum, eliminate leaks, and reduce oil consumption without replacing the entire oil separator. This 85mm PCV diaphragm is designed to replace the failed membrane in Porsche M48.51 engines.\u003c\/p\u003e\n\u003cp\u003eOver time, the original diaphragm loses elasticity due to heat and oil exposure, leading to cracks or collapse. This causes vacuum leaks, unstable engine operation, and increased wear. Replacing the membrane restores correct crankcase ventilation and engine performance.\u003c\/p\u003e\n\u003cp\u003eImportant Note! Please verify your engine type and part number before purchase to ensure compatibility.\u003c\/p\u003e\n\u003cp\u003eCommon Failure Symptoms:\u003c\/p\u003e\n\u003cp\u003e• High-pitched whistling noise near oil separator\u003cbr\u003e• Rough or unstable idle\u003cbr\u003e• Engine misfires and poor response\u003cbr\u003e• Increased oil consumption and exhaust smoke\u003cbr\u003e• Vacuum leaks affecting engine performance\u003c\/p\u003e\n\u003cp\u003eWhy This Repair Kit Works:\u003c\/p\u003e\n\u003cp\u003e• Restores proper crankcase pressure and vacuum\u003cbr\u003e• Eliminates air leaks and engine noise\u003cbr\u003e• Helps stabilize idle and engine operation\u003cbr\u003e• Reduces oil consumption\u003cbr\u003e• Cost-effective alternative to full oil separator replacement\u003c\/p\u003e\n\u003cp\u003eTechnical Specifications:\u003c\/p\u003e\n\u003cp\u003e• Diameter: 85mm\u003cbr\u003e• Designed for Porsche 4.8L M48.51 engine\u003cbr\u003e• 1:1 replacement matching OEM dimensions\u003cbr\u003e• Durable, oil-resistant elastomer material\u003c\/p\u003e\n\u003cp\u003ePerfect Fitment:\u003c\/p\u003e\n\u003cp\u003e• Direct replacement diaphragm\u003cbr\u003e• Fits oil separator part numbers: 94810723653;94810723652\u003c\/p\u003e\n\u003cp\u003eCompatibility:\u003c\/p\u003e\n\u003cp\u003ePorsche Cayenne 4.8L (S; GTS; Turbo)\u003cbr\u003eEngine: M48.51\u003c\/p\u003e\n\u003cp\u003eImportant Installation Note: This part does not fit M48.01 engines. If your oil separator has only one outlet, it is M48.01. This diaphragm is designed for M48.51 versions with two outlets.\u003c\/p\u003e\n\u003cp\u003eAfter installation, allow the engine to idle for a few minutes, then restart it to let the ECU adapt to the restored vacuum pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":51698915279162,"sku":"KL94810723653","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/3354412842-membrana-maslootdelitelya-porsche.jpg?v=1754557472"},{"product_id":"repair-kit-pcv-porsche-cayenne-4-5-94810513204-94810513107-94810513103-94810513106","title":"PCV Repair Kit – Porsche Cayenne 4.5L V8 M48 | OEM 94810513204 94810513107","description":"\u003ch1\u003ePCV Repair Kit — Porsche Cayenne 4.5L V8 M48 | OEM 94810513204 \/ 94810513107 \/ 94810513103 \/ 94810513106\u003c\/h1\u003e\n\u003ch3\u003e\u003cstrong\u003eFix Crankcase Ventilation on Your Porsche Cayenne 4.5L V8 — 83mm Membrane Repair Kit.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eA failed 83mm PCV membrane on the Porsche Cayenne 4.5L V8 M48 engine causes oil consumption, crankcase fault codes, and oil mist in the intake. This repair kit replaces the membrane and all associated seals for oil separator assemblies 94810513204, 94810513107, 94810513103, and 94810513106.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eMembrane diameter:\u003c\/strong\u003e 83mm\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVehicle Compatibility\u003c\/h2\u003e\u003cp\u003ePorsche Cayenne 4.5L V8 (M48.00\/M48.01\/M48.50) — 955\/957 platform\u003c\/p\u003e\n\u003ch2\u003eOEM References\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e94810513204\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e94810513107 \/ 94810513103 \/ 94810513106 (cross-reference)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":51698963251514,"sku":"KL94810513204","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/4_f0d59cba-e424-4933-badb-0ec88bbd4246.jpg?v=1781188050"},{"product_id":"valve-cover-repair-kit-vag-3-0-tdi-059103470as-059103470al","title":"Valve Cover Repair Kit – VAG 3.0 TDI | OEM 059103470AS 059103470AL","description":"\u003ch2\u003e059103470AS \/ 059103470AL Valve Cover Repair Kit for Audi VW Porsche 3.0 TDI\u003c\/h2\u003e\u003cp\u003eThe 059103470AS \/ 059103470AL valve cover repair kit is designed for selected Audi, Volkswagen and Porsche 3.0 TDI applications. This product is intended to restore the function of the existing valve cover system without replacing the complete assembly.\u003c\/p\u003e\u003cp\u003eUnlike a full valve cover replacement, this listing is positioned as a repair kit. It includes a membrane-based repair focus with a 52 mm diaphragm for targeted service of the original unit.\u003c\/p\u003e\u003ch2\u003eOEM \/ Reference Numbers\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePrimary OEM:\u003c\/strong\u003e 059103470AS, 059103470AL\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated \/ Reference Numbers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e95810513611\u003c\/li\u003e\n\u003cli\u003e95810513610\u003c\/li\u003e\n\u003cli\u003e2000003231\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePart Type\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eValve cover repair kit\u003c\/li\u003e\n\u003cli\u003eCrankcase ventilation repair kit\u003c\/li\u003e\n\u003cli\u003eValve cover membrane repair solution\u003c\/li\u003e\n\u003cli\u003e3.0 TDI valve cover repair kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat This Part Does\u003c\/h2\u003e\u003cp\u003eThis repair kit is used to restore the operation of the valve cover ventilation system in applications where the original internal membrane or related service components have failed. Instead of replacing the complete cover assembly, the repair kit helps bring the existing unit back into proper working condition.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAudi A4 \/ Avant 2013–2015\u003c\/li\u003e\n\u003cli\u003eAudi A4 allroad quattro 2010–2016\u003c\/li\u003e\n\u003cli\u003eAudi A4 \/ S4 \/ Avant 2013–2015\u003c\/li\u003e\n\u003cli\u003eAudi A4 \/ S4 \/ Avant \/ quattro 2013–2015\u003c\/li\u003e\n\u003cli\u003eAudi A5 \/ S5 Coupe \/ Sportback 2012–2016\u003c\/li\u003e\n\u003cli\u003eAudi A5 \/ S5 Cabriolet 2012–2017\u003c\/li\u003e\n\u003cli\u003eAudi A6 \/ Avant 2011–2018\u003c\/li\u003e\n\u003cli\u003eAudi A6 Allroad quattro 2013–2018\u003c\/li\u003e\n\u003cli\u003eAudi A6 \/ S6 \/ Avant quattro 2011–2018\u003c\/li\u003e\n\u003cli\u003eAudi A7 Sportback 2011–2018\u003c\/li\u003e\n\u003cli\u003eAudi A8 2010–2017\u003c\/li\u003e\n\u003cli\u003eAudi A8 \/ S8 quattro 2010–2017\u003c\/li\u003e\n\u003cli\u003eAudi Q5 2010–2017\u003c\/li\u003e\n\u003cli\u003eVolkswagen Touareg 2011–2018\u003c\/li\u003e\n\u003cli\u003ePorsche Cayenne 2011–2018\u003c\/li\u003e\n\u003cli\u003ePorsche Macan 2014–2018\u003c\/li\u003e\n\u003cli\u003ePorsche Panamera 2010–2016\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease verify OEM number, model year and valve cover design before ordering.\u003c\/p\u003e\u003ch3\u003eEngine \/ Engine Family \/ Technical Detail\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEngine focus: 3.0 TDI\u003c\/li\u003e\n\u003cli\u003eMembrane reference: 2000003231\u003c\/li\u003e\n\u003cli\u003eMembrane diameter: 52 mm\u003c\/li\u003e\n\u003cli\u003ePart format: repair kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Symptoms of Failure\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLoss of proper crankcase ventilation function\u003c\/li\u003e\n\u003cli\u003eMembrane-related sealing issues inside the valve cover system\u003c\/li\u003e\n\u003cli\u003eNeed to repair the original valve cover instead of replacing the full assembly\u003c\/li\u003e\n\u003cli\u003eVentilation-related drivability issues caused by internal diaphragm wear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Choose This Replacement\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTargets the exact 059103470AS \/ 059103470AL repair intent\u003c\/li\u003e\n\u003cli\u003eSupports repair of the existing valve cover system\u003c\/li\u003e\n\u003cli\u003eCost-effective alternative to replacing the complete assembly\u003c\/li\u003e\n\u003cli\u003eIncludes a membrane-based repair focus for the correct service type\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant Before Ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify OEM number 059103470AS or 059103470AL against your original part\u003c\/li\u003e\n\u003cli\u003eCheck related references 95810513611 and 95810513610 where applicable\u003c\/li\u003e\n\u003cli\u003eConfirm 3.0 TDI application, model year and valve cover design\u003c\/li\u003e\n\u003cli\u003eMake sure you need a repair kit, not a complete valve cover assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat does 059103470AS \/ 059103470AL fit?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThis repair kit is used for selected Audi, Volkswagen and Porsche 3.0 TDI applications, including Audi A4, A5, A6, A7, A8, Q5, Volkswagen Touareg, Porsche Cayenne, Macan and Panamera within the listed year ranges.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eIs 95810513611 the same type of part as 059103470AS?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003e95810513611 is a related reference number for the same valve cover repair kit type associated with 059103470AS and 059103470AL.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat does this valve cover repair kit do?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eIt restores the function of the existing valve cover ventilation system by replacing serviceable internal components instead of replacing the full valve cover assembly.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eIs this a complete valve cover assembly or a repair kit?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThis product is a repair kit. It is not a complete valve cover assembly.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat technical detail is listed for the membrane in this kit?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThe membrane reference is 2000003231 and the diaphragm diameter is 52 mm.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow do I confirm compatibility before ordering?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eMatch OEM 059103470AS or 059103470AL with your original part, compare related references if needed, and verify your vehicle model, year, engine type and valve cover design before ordering.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":51699042517306,"sku":"KL059103470AS","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/KL059103470AS.jpg?v=1763810242"},{"product_id":"oil-separator-repair-kit-porsche-cayenne-4-8l-m48-01-94810723602","title":"Valve Cover PCV Repair Kit – Porsche Cayenne 4.8L M48.01 | OEM 94810723602","description":"\u003ch1\u003eValve Cover PCV Repair Kit — Porsche Cayenne 4.8L M48.01 | OEM 94810723602 | US Warehouse\u003c\/h1\u003e\n\n\u003ch3\u003e\u003cstrong\u003eFix PCV Crankcase Ventilation on Your Porsche Cayenne 4.8L M48.01 — Complete Oil Separator Repair Kit. Ships from US.\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003eA failed PCV oil separator on the Porsche Cayenne 4.8L M48.01 engine causes oil consumption, crankcase fault codes, and oil mist in the intake. This complete repair kit restores correct oil separator function. Ships from US warehouse.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color:#fff9e6;border-left:4px solid #ffcc00;padding:15px;margin:20px 0;\"\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e This diaphragm is NOT suitable for M48.51 engines. Verify your engine code (M48.01 vs M48.51) before ordering.\u003c\/div\u003e\n\n\u003ch2\u003eCompatible Oil Separators\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003e94810723602\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eVehicle Compatibility\u003c\/h2\u003e\n\u003cp\u003ePorsche Cayenne 4.8L GTS\/Turbo\/Turbo S — with M48.01 engine\u003c\/p\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":51699054969146,"sku":"KL94810723601","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/remkomplekt-maslootdelitelya-porsche-cayenne-4-8l-m48-01-94810723602-9.jpg?v=1754560287"},{"product_id":"canister-valve-audi-and-porsche-3-0tfsi-8k0906253l-8k0906253j-8k0906253n","title":"Canister Purge Valve – Audi \/ Porsche 2.0L | OEM 8K0906253L 8K0906253J 8K0906253N","description":"\u003ch2\u003e8K0906253L \/ 8K0906253J \/ 8K0906253N Canister Purge Valve for Audi Porsche 3.0TFSI\u003c\/h2\u003e\n \u003cp\u003e\u003cstrong\u003e8K0906253L\u003c\/strong\u003e, \u003cstrong\u003e8K0906253J\u003c\/strong\u003e and \u003cstrong\u003e8K0906253N\u003c\/strong\u003e are OEM reference numbers for a canister purge valve used in selected Audi and Porsche applications. This component is part of the EVAP system and helps control fuel vapor flow from the charcoal canister to the intake system, supporting proper emissions operation and stable engine behavior.\u003c\/p\u003e\n \u003cp\u003eThis product page also references related numbers \u003cstrong\u003e8K0906253A\u003c\/strong\u003e, \u003cstrong\u003e8K0906253C\u003c\/strong\u003e, \u003cstrong\u003e8K0906253E\u003c\/strong\u003e and \u003cstrong\u003e9A790625300\u003c\/strong\u003e.\u003c\/p\u003e\n \u003ch2\u003eOEM \/ Reference Numbers\u003c\/h2\u003e\n \u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e8K0906253L\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e8K0906253J\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e8K0906253N\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e8K0906253A\u003c\/li\u003e\n\u003cli\u003e8K0906253C\u003c\/li\u003e\n\u003cli\u003e8K0906253E\u003c\/li\u003e\n\u003cli\u003e9A790625300\u003c\/li\u003e\n\u003c\/ul\u003e\n \u003ch3\u003ePart Type\u003c\/h3\u003e\n \u003cul\u003e\n\u003cli\u003eCanister valve\u003c\/li\u003e\n\u003cli\u003eEVAP purge valve\u003c\/li\u003e\n\u003cli\u003eVapor canister purge solenoid\u003c\/li\u003e\n\u003cli\u003eFuel tank breather valve\u003c\/li\u003e\n\u003c\/ul\u003e\n \u003ch2\u003eWhat This Valve Does\u003c\/h2\u003e\n \u003cp\u003eThe canister purge valve is a key part of the evaporative emissions system. It regulates when fuel vapors stored in the charcoal canister are routed back into the engine for combustion. If the valve sticks, leaks or fails electrically, the vehicle may show EVAP-related fault codes, drivability issues or a check engine light.\u003c\/p\u003e\n \u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\n \u003cp\u003eAccording to the product page, this valve is suitable for selected Audi and Porsche applications. Listed Audi fitments include:\u003c\/p\u003e\n \u003cul\u003e\n\u003cli\u003eAudi A4\u003c\/li\u003e\n\u003cli\u003eAudi A5\u003c\/li\u003e\n\u003cli\u003eAudi A6\u003c\/li\u003e\n\u003cli\u003eAudi A7\u003c\/li\u003e\n\u003cli\u003eAudi Q5\u003c\/li\u003e\n\u003cli\u003eAudi RS5\u003c\/li\u003e\n\u003cli\u003eAudi S4\u003c\/li\u003e\n\u003cli\u003eAudi S5\u003c\/li\u003e\n\u003cli\u003eAudi S6\u003c\/li\u003e\n\u003cli\u003eAudi S7\u003c\/li\u003e\n\u003cli\u003eAudi SQ5\u003c\/li\u003e\n\u003cli\u003ePorsche applications listed on the product page\u003c\/li\u003e\n\u003c\/ul\u003e\n \u003ch3\u003eEngine References Mentioned on the Product Page\u003c\/h3\u003e\n \u003cul\u003e\n\u003cli\u003e3.0 TFSI\u003c\/li\u003e\n\u003cli\u003e3.0L V6\u003c\/li\u003e\n\u003cli\u003e4.0L V8 in selected Audi fitments listed on the page\u003c\/li\u003e\n\u003cli\u003e2.0L and other fitments appear in the page applicability list and should be checked by OEM number before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n \u003ch2\u003eCommon Symptoms of a Faulty Purge Valve\u003c\/h2\u003e\n \u003cul\u003e\n\u003cli\u003eCheck engine light\u003c\/li\u003e\n\u003cli\u003eEVAP-related fault codes such as P0441 or P0442\u003c\/li\u003e\n\u003cli\u003eFuel vapor system malfunction symptoms\u003c\/li\u003e\n\u003cli\u003eRough idle or unstable running in some cases\u003c\/li\u003e\n\u003cli\u003eEmissions system faults\u003c\/li\u003e\n\u003cli\u003eDifficulties related to vapor purge control\u003c\/li\u003e\n\u003c\/ul\u003e\n \u003ch2\u003eWhy Choose This Replacement\u003c\/h2\u003e\n \u003cul\u003e\n\u003cli\u003eTargets exact OEM search intent for 8K0906253L, 8K0906253J and 8K0906253N\u003c\/li\u003e\n\u003cli\u003eSuitable for EVAP and purge valve related repairs\u003c\/li\u003e\n\u003cli\u003eCovers multiple related reference numbers\u003c\/li\u003e\n\u003cli\u003eFits selected Audi and Porsche applications listed on the product page\u003c\/li\u003e\n\u003cli\u003eUseful for resolving purge valve and emissions-related faults\u003c\/li\u003e\n\u003c\/ul\u003e\n \u003ch2\u003eImportant Before Ordering\u003c\/h2\u003e\n \u003cp\u003ePlease match your original part number with \u003cstrong\u003e8K0906253L\u003c\/strong\u003e, \u003cstrong\u003e8K0906253J\u003c\/strong\u003e or \u003cstrong\u003e8K0906253N\u003c\/strong\u003e before purchase. If your original valve uses one of the related numbers \u003cstrong\u003e8K0906253A\u003c\/strong\u003e, \u003cstrong\u003e8K0906253C\u003c\/strong\u003e, \u003cstrong\u003e8K0906253E\u003c\/strong\u003e or \u003cstrong\u003e9A790625300\u003c\/strong\u003e, verify interchangeability by vehicle, engine and connector design before ordering.\u003c\/p\u003e\n \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat does 8K0906253L fit?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cdiv itemprop=\"text\"\u003e\u003cp\u003e8K0906253L is listed on this product page as a canister purge valve reference number for selected Audi and Porsche applications. The page includes Audi A4, A5, A6, A7, Q5, RS5, S4, S5, S6, S7 and SQ5 fitments, along with Porsche compatibility.\u003c\/p\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eAre 8K0906253J and 8K0906253N the same type of part as 8K0906253L?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cdiv itemprop=\"text\"\u003e\u003cp\u003eYes. This page presents 8K0906253L, 8K0906253J and 8K0906253N as core OEM references for the same canister purge valve type. It also mentions related numbers 8K0906253A, 8K0906253C, 8K0906253E and 9A790625300.\u003c\/p\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat does a canister purge valve do?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cdiv itemprop=\"text\"\u003e\u003cp\u003eThe canister purge valve controls the flow of fuel vapors from the charcoal canister into the intake system. It is part of the EVAP system and helps the vehicle manage emissions correctly.\u003c\/p\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat symptoms can indicate a faulty 8K0906253L purge valve?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cdiv itemprop=\"text\"\u003e\u003cp\u003eCommon symptoms may include a check engine light, EVAP fault codes such as P0441 or P0442, vapor purge control issues and, in some cases, unstable engine behavior.\u003c\/p\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eIs 9A790625300 a related reference number for this valve?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cdiv itemprop=\"text\"\u003e\u003cp\u003eYes. The product page includes 9A790625300 as an additional reference number associated with this canister valve. It should be treated as a related OEM number, while the main optimization focus remains on 8K0906253L, 8K0906253J and 8K0906253N.\u003c\/p\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow do I confirm compatibility before ordering?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cdiv itemprop=\"text\"\u003e\u003cp\u003eCompare your original part number with 8K0906253L, 8K0906253J or 8K0906253N and then confirm vehicle fitment, engine type and connector design. If your original valve carries 8K0906253A, 8K0906253C, 8K0906253E or 9A790625300, check interchangeability before purchase.\u003c\/p\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n \u003c\/div\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":51699297255738,"sku":"KL8K0906253L","price":127.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/membrana-kvkg-audi-2-4l-i-3-2l-06e103245e-1.jpg?v=1754564058"},{"product_id":"oil-separator-membrane-audi-and-porsche-4-0t-pab103495","title":"PCV Oil Separator Diaphragm Repair Kit – Audi \/ Porsche 4.0T V8 | OEM PAB103495 9A710349501 | RS6 \/ RS7 \/ RSQ8 \/ Cayenne \/ Panamera","description":"\u003ch2\u003ePAB103495 \/ 9A710349501 PCV Oil Separator Diaphragm Repair Kit for Audi Porsche 4.0T V8\u003c\/h2\u003e\u003cp\u003eThe PAB103495 \/ 9A710349501 PCV oil separator diaphragm repair kit is designed for selected Audi and Porsche 4.0T V8 applications. It supports repair of the existing PCV oil separator unit without replacing the complete assembly.\u003c\/p\u003e\u003cp\u003eThis product is a diaphragm-based repair solution for the existing oil separator system. It should not be treated as a complete oil separator assembly.\u003c\/p\u003e\u003ch2\u003eOEM \/ Reference Numbers\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePrimary OEM:\u003c\/strong\u003e PAB103495, 9A710349501\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated \/ Reference Numbers:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePAB10349500\u003c\/li\u003e\n\u003cli\u003ePAB10346400\u003c\/li\u003e\n\u003cli\u003e9A710346401\u003c\/li\u003e\n\u003cli\u003e9A710346402\u003c\/li\u003e\n\u003cli\u003e0P2103495F\u003c\/li\u003e\n\u003cli\u003e0P2103495D\u003c\/li\u003e\n\u003cli\u003e0P2103464D\u003c\/li\u003e\n\u003cli\u003ePAB103495B\u003c\/li\u003e\n\u003cli\u003ePAB198542\u003c\/li\u003e\n\u003cli\u003e0P2198542\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePart Type\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePCV oil separator diaphragm repair kit\u003c\/li\u003e\n\u003cli\u003eOil separator membrane\u003c\/li\u003e\n\u003cli\u003eCrankcase ventilation diaphragm\u003c\/li\u003e\n\u003cli\u003e4.0T V8 PCV repair solution\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat This Part Does\u003c\/h2\u003e\u003cp\u003eThis diaphragm repair kit helps the PCV oil separator system maintain correct pressure control and sealing. When the original diaphragm fails, the system may produce vacuum leak symptoms, abnormal oil consumption or idle issues.\u003c\/p\u003e\u003ch2\u003eCompatible Vehicles\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePorsche Panamera 2017–2024\u003c\/li\u003e\n\u003cli\u003ePorsche Cayenne 2018–2026\u003c\/li\u003e\n\u003cli\u003eAudi RS6 2020–2026\u003c\/li\u003e\n\u003cli\u003eAudi RS7 2020–2026\u003c\/li\u003e\n\u003cli\u003eAudi RSQ8 2020–2026\u003c\/li\u003e\n\u003cli\u003eAudi A8 \/ S8 2018–2026\u003c\/li\u003e\n\u003cli\u003eAudi Q7 \/ SQ7 2016–2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease verify OEM number, engine type and oil separator design before ordering.\u003c\/p\u003e\u003ch3\u003eEngine \/ Engine Family \/ Technical Detail\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEngine focus: 4.0L Twin-Turbo V8\u003c\/li\u003e\n\u003cli\u003ePart format: PCV oil separator diaphragm repair kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCommon Symptoms of Failure\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHigh-pitched whistle\u003c\/li\u003e\n\u003cli\u003eIncreased oil consumption\u003c\/li\u003e\n\u003cli\u003eRough idle\u003c\/li\u003e\n\u003cli\u003eMisfires\u003c\/li\u003e\n\u003cli\u003eCheck engine light\u003c\/li\u003e\n\u003cli\u003eVacuum leak symptoms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Choose This Replacement\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTargets exact OEM intent for PAB103495 and 9A710349501\u003c\/li\u003e\n\u003cli\u003eSupports repair of the existing PCV oil separator unit\u003c\/li\u003e\n\u003cli\u003eCost-effective alternative to replacing the complete assembly\u003c\/li\u003e\n\u003cli\u003eBuilt for Audi and Porsche 4.0T V8 applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant Before Ordering\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eVerify OEM PAB103495 or 9A710349501 against your original part\u003c\/li\u003e\n\u003cli\u003eCompare related references where applicable\u003c\/li\u003e\n\u003cli\u003eConfirm your 4.0T V8 application and oil separator design\u003c\/li\u003e\n\u003cli\u003eMake sure you need the diaphragm repair kit, not a complete oil separator assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat does PAB103495 \/ 9A710349501 fit?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThese numbers are used for selected Audi and Porsche 4.0T V8 PCV oil separator diaphragm repair applications, including RS6, RS7, RSQ8, A8, S8, Q7, SQ7, Cayenne and Panamera model groups.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eIs PAB10349500 the same type of part as PAB103495?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003ePAB10349500 is a related reference number within the same PCV oil separator diaphragm repair application family.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat does this PCV oil separator diaphragm repair kit do?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eIt helps restore pressure control and sealing inside the existing PCV oil separator unit.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat symptoms can indicate diaphragm failure?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eCommon signs include a high-pitched whistle, oil consumption, rough idle, misfires, check engine light or vacuum leak symptoms.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eIs this a complete oil separator assembly or repair kit?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThis product is a diaphragm repair kit for the existing PCV oil separator unit. It is not a complete oil separator assembly.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow do I confirm compatibility before ordering?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eMatch OEM PAB103495 or 9A710349501 with your original unit and confirm your vehicle model, engine type and oil separator design.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":52926744920378,"sku":"KLPAB103495","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/Untitled-1_edef0365-7ece-4e23-b169-2c0f5bba3d2e.jpg?v=1769094904"},{"product_id":"oil-separator-repair-kit-porsche-cayenne-4-8l-m48-51-94810723653-94810723652","title":"PCV Repair Kit – Porsche Cayenne 4.8L M48.51 | OEM 94810723653 94810723652 | 85mm Membrane","description":"\u003cp data-start=\"94\" data-end=\"255\"\u003e\u003cstrong data-start=\"94\" data-end=\"156\"\u003ePCV Repair Kit for Porsche Cayenne 4.8L (M48.51)\u003c\/strong\u003e\u003cbr data-start=\"156\" data-end=\"159\"\u003eOEM Oil Separator Numbers: \u003cstrong data-start=\"186\" data-end=\"214\"\u003e94810723653, 94810723652\u003c\/strong\u003e\u003cbr data-start=\"214\" data-end=\"217\"\u003eIncluded diaphragm diameter: \u003cstrong data-start=\"246\" data-end=\"255\"\u003e85 mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"257\" data-end=\"451\"\u003eThis repair kit is designed to restore the original oil separator (air-oil separator \/ crankcase ventilation unit) on Porsche Cayenne 4.8L M48.51 engines without replacing the complete assembly.\u003c\/p\u003e\n\u003cp data-start=\"453\" data-end=\"712\"\u003eOver time, internal components of the Porsche oil separator wear out. The diaphragm loses elasticity, cracks may develop, and sealing elements no longer maintain proper airtightness. As a result, the crankcase ventilation system begins to operate incorrectly.\u003c\/p\u003e\n\u003cp data-start=\"714\" data-end=\"828\"\u003eWhen the diaphragm and seals fail, unmetered air (after the MAF sensor) is drawn into the engine, which may cause:\u003c\/p\u003e\n\u003cp data-start=\"830\" data-end=\"937\"\u003e• Rough or unstable idle\u003cbr data-start=\"854\" data-end=\"857\"\u003e• Hard starting\u003cbr data-start=\"872\" data-end=\"875\"\u003e• Possible misfires\u003cbr data-start=\"894\" data-end=\"897\"\u003e• Air-fuel mixture related fault codes\u003c\/p\u003e\n\u003cp data-start=\"939\" data-end=\"1169\"\u003eIn addition, a damaged oil separator can allow dust and contaminants to enter the engine, accelerating wear of internal components. A common symptom of failure is a whistling noise or vacuum leak sound near the oil separator area.\u003c\/p\u003e\n\u003cp data-start=\"1171\" data-end=\"1462\"\u003ePorsche supplies the oil separator only as a complete assembly, which is expensive, while in many cases full replacement is unnecessary. This repair kit allows you to restore the original unit by replacing worn internal components, including the diaphragm, while keeping the factory housing.\u003c\/p\u003e\n\u003cp data-start=\"1464\" data-end=\"1484\"\u003e\u003cstrong data-start=\"1464\" data-end=\"1484\"\u003eRepair Overview:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1486\" data-end=\"1688\"\u003e• Remove the oil separator from the engine\u003cbr data-start=\"1528\" data-end=\"1531\"\u003e• Disassemble the housing and replace worn parts with components from the repair kit\u003cbr data-start=\"1615\" data-end=\"1618\"\u003e• Reassemble the oil separator and reinstall it\u003cbr data-start=\"1665\" data-end=\"1668\"\u003e• Start the engine\u003c\/p\u003e\n\u003cp data-start=\"1690\" data-end=\"1952\"\u003eAfter the first start, brief unstable engine operation may occur. This is normal and related to fuel trim adaptation after eliminating the air leak. The ECU may need some time to recalibrate. It is recommended to let the engine run, then shut it off and restart.\u003c\/p\u003e\n\u003cp data-start=\"1954\" data-end=\"2046\"\u003eAfter repair, proper crankcase ventilation sealing and normal engine operation are restored.\u003c\/p\u003e","brand":"Klifex","offers":[{"title":"Default Title","offer_id":52959279874362,"sku":"KL94810723652","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/7207\/7626\/files\/11_9b3cfcb2-c128-44e2-bca3-72f70242e50c.jpg?v=1769860661"}],"url":"https:\/\/klifex.net\/collections\/porsche-pcv-system-repair-kits.oembed","provider":"Klifex – Automotive Repair Kits","version":"1.0","type":"link"}